Almeg

Controls

Solid State Latching Relay

A Latching Relay is designed to control or hold a level or action between two

switch points.  The most common application would be for level control

with application like co-generation, sumps or other oil tanks and water tanks.

Can also be used with most any non voltage producing switches.

Hydraulic cylinders  - doors switch - rotating tanks - and more

SSR1000 Latching Relay

Design Criteria:

The holding relay is activated by a switch point.  Once this switch

is activated  - the relay will hold that state until the next control

point is hit.  

Even..if the float returns to the first activated switch point - nothing

will happen - as the relay has been latched.  When the level does

reach the second switch point - the relay will then change state. 

Again - it is then latched in that new position - and nothing will

happen until the other switch is activated.

Possible Applications:

Working Parameters: