Almeg

Controls

Barrel Gauge

Krueger Level Gauge

The Barrel Gauge is specifically designed for use in a

wide variety of standing barrels. It is available for the

55, 30, and 15 gallon drum models.  This gauge comes

available in  plastic, galvanized, and stainless steel versions.

Direct mechanical action, reliable construction and easy

readability make this gauge a perfect choice for

barrel volume measurement.

A. CALIBRATION ASSEMBLY:  Inner and outer plastic housings with printed calibration paper between

housings.  (options-glass inner piece)

B.  INDICATOR DISC:  Red  HDPE plastic

C.  LOCK NUT:  Red plastic to hold calibration assembly in place.  (options-aluminum lock nut)

D. DURO NITRILE GASKET:  On which flanges on base of calibration assembly are firmly seated to  

      prevent leakage. (options-viton gasket)

E. ALUMINUM DIE CAST BUSHING:  Type B-1.5 fits 1.5” standard npt tank flange.  Type B-2 fits standard 2” npt tank flange.  B-3/4 fits standard 3/4” npt tank flange.

      (options-stainless steel for 3/4” only, PVC plastic-page...7)

F.  STANDARD ROD:  0.1875 dia. galvanized steel rod. (options-stainless steel, peek plastic-page...7)

G. PUSH ROD:  0.125 dia. galvanized steel rod activates indicator disc by movement of float arm (I).

      (options-stainless steel, peek plastic-page...7)

H.  BRASS RIVETS:  Four brass tubular rivets. (options-non-riveted, stainless)

I. FLOAT ARM ASSEMBLY:  0.1875 x 0.0625 galvanized steel flat rod, including bracket and rod,                       

      attached to standard, push rod, and plastic float. (options-stainless steel, plastic-page...7)

J. PLASTIC FLOAT:  High density polyethelene float   1.125” dia. x 3.0” long. (options-stainless float,

      nitrophyll float, 3/4” float)-Stainless floats do not fit through 3/4” openings.

Barrel Gauges are manufactured to fit specific barrel sizes from 15 gallon, 30 gallon, and 55 gallon drums.    Standard rod (F),  push rod (G), float arm assembly (I) are varied in length to provide correct operation of gauge. 

Ordering Instructions—Part numbers are as follows B-(gallons)-(opening).  Example—B-55-3/4”.