Almeg

Controls

Drum or Tank L Gauge

Krueger Gauge

One of the most reliable and economical gauges is

recommended for small tank applications with

depths of 6” up to 30”.

· Highly visible top reading gauge.

· Tough, acrylic calibration dome.

· Available in 1 5/16”, 1 1/2”, and 2” openings.

· Available with flange for welding or soldering to tank.

A. CALIBRATION ASSEMBLY:  Cellulose Acetate

B.  INDICATOR NEEDLE:  Red  HDPE plastic

C.  LOCK NUT:  Red plastic to hold L Head in place.  (options-aluminum lock nut)

D. DURO NITRILE GASKET:  On which flanges on base of calibration assembly are firmly seated to  

      prevent leakage. (options-viton gasket)

E. ALUMINUM DIE CAST BUSHING:  Type L-1.5 fits 1.5” standard npt tank flange.  Type L-2 fits  

      standard 2” npt tank flange.  L-1-5/16” is a stainless weld on flange.

F.  BRASS RIVETS:  One brass tubular rivet. (options-stainless)

G. FLOAT ARM ASSEMBLY:  0.1875 x 0.0625 galvanized steel flat rod,  attached to indicator. (options-

     stainless steel)

H.  PLASTIC FLOAT:  High density polyethelene float   1.125” dia. x 3.0” long. (options-stainless float,

      nitrophyll float, 3/4” float)

L-Gauges are manufactured to fit specific tank sizes from 6” to 30”.    Float rod is varied in length to 

accommodate different depths. 

Ordering information—Part numbers are as follows: L-(opening)-(Depth).  Example—L-2-6”.