top of page

Standard Single Level

A high alarm level switch that can also be used as low level alarm switch.

A alarm level switch can be mounted in the top or the bottom of the tank.

The contact can be normally open or normally closed. 

If the liquid level reaches the float or falls to the float it will change the state of the internal reed contact and can then send an alarm or lock a control relay out.


See all available switches below. 

brass buna single point level switch
Single Level: Products

Single Level Float Switches

Brass or Stainless Steel Single Activation Switch

One Piece CNC Body

1/8" NPT, 1/4"NPT

High Pressure 

High Temperature

Material Options

Don't let it's small size fool you. 

The probe itself comes in both 316 stainless and brass and is CNC machined for a one piece probe design. 


The reeds, are hermetically sealed as well as heat shrink sealed. The

the entire reed is then encapsulated to

prevent any moisture from entering

the main body.

Design Criteria:

  • Rugged level applications

  • Custom lead lengths

  • Custom lead material

  • Completely encapsulated

  • Several configurations

  • N/O or N/C reversible

  • Low cost

 Possible Applications

  • High alarm

  • Steam cookers

  • Oil level control

  • Storage tank level

  • Beverage dispensing

  • Fryers

  • Condensate tank level

Working Parameters:

  • Metal probe with optional floats

  • Maximum temperature - 300 deg. F in SS

  • Can be about 600 PSI -special request

  • Completely encapsulated

  • 1/8" NPT, 1/4"NPT

  • Optional float specific gravity

single point level switch

Single Point Plastic Switch

Plastic Level Switch for high alarm switch or low alarm switch.

Materials for most applications.


KVK12 PVDF magnetic level switch

Single Side Mount Plastic or Stainless Steel Level Switches

Side Mount alarm switch .

Materials for most applications.









SX201 PVDF magnetic level switch

Single 90 Degree Side Mount Level Switch


Good looks and a smart design make this rugged model ideal for OEM or one-shot applications.  The activation can be selected on location by simply reversing the float.  Installs in the side of a vessel with simplicity being the key.  Simply drill a 25/64” or 10mm hole or 1/8” NPT thread and install. 

SX100 Magnetic level switch with 90 degree bend
Single Level: Products
bottom of page